samtec usa ?tel: 1-800-samtec-9 or 812-944-6733 ?fax: 812-948-5047 samtec uk ?tel: 01236 739292 ?fax: 01236 727113 samtec germany ?tel: +49 (0) 89 / 89460-0 ?fax: +49 (0) 89 / 89460-299 samtec france ?tel: 01 60 95 06 60 ?fax: 01 60 95 06 61 samtec italy ?tel: 39 039 6890337 ?fax: 39 039 6890315 samtec asia pacific ?tel: 65-745-5955 ?fax: 65-841-1502 samtec china ?tel: 86-21-5385-4089 ?fax: 86-21-5385-4047 samtec japan ?tel: 81-424-42-8318 ?fax: 81-424-42-8319 samtec taiwan ?tel: (02) 2395-1677 ?fax: (02) 2395-1689 samtec hong kong ?tel: 852-26904858 ?fax: 852-26904842 due to technical progress, all designs, specifications and components are subject to change without notice. ftr 115 52 g d ftr 130 02 s d ftr?20 02 s s available with optional pick-and-place pad micro pitch (1,27mm) .050" (2,54mm) .100" single and double row surface mount factsheet f-201 ftr no. pins per row row option plating option lead style 1 02 thru 40 specify lead style from chart mates with: rsm, sms, slm option xxx = polarized a = alignment pin (5 positions minimum d only) (metal or plastic at samtec discretion) lc = locking clip (6 positions min. d only) p = plastic pick & place pad ( d= 5 positions minimum) ( s= 9 positions minimum) tr = tape & reel (required for 5 and 6 positions) g =10 " (0,25 m) gold post gold flash tail s =30 " (0,76 m) gold post 150 " (3,81 m) tin tail t =150 " (3,81 m) tin p option options processing: max processing temp: 230 c for 60 seconds smt lead coplanarity: (0,10mm) .004" max (02-20) (0,15mm) .006" max (21-40) suggested paste thickness: for most applications add (0,05mm) .002" to max smt lead coplanarity suggested pcb layouts: your specific layout may vary specifications materials: insulator material: black liquid crystal polymer or nylon 4/6 terminal material: phosphor bronze current rating: 1a operating temp range: -65 c to +105 c with tin; -65 c to +125 c with gold plating: au or sn over 50 " (1,27 m) ni note: some sizes, styles and options are non-standard, non-returnable. important note: style -02 with -s plating should not be mated with slm (2,54) .100 (1,27) .050 (8,28) .326 (5,59) .220 (0,74) .029 (1,27) .050 (3,05) .120 (0,71) .028 -a= (1,27 -0,00 +0,08 ) .050 -.000 +.003 dia (2) -lc= (1,19) .047 dia (2) (1,27) .050 x no. of positions (2,48) .098 (5,03) .198 (4,98) .196 (7,52) .296 (2,54) .100 (1,27) .050 typ 40 80 79 02 01 01 (1,27) .050 (1,27) .050 b (0,46) .018 sq b (0,46) .018 sq (1,27) .050 (1,27) .050 (2,54) .100 (0,51) .020 (0,46) .018 sq (10,16) .400 (5,08) .200 x (1,27) .050 (1,02) .040 (1,09) .043 dia (9,53) .375 (9,91) .390 x (1,40) .055 p option p option a option lc option lead style 01 02 03 51 52 53 54 55 56 57 b (5,84) .230 (2,54) .100 (3,18) .125 (4,83) .190 (5,21) .205 (7,24) .285 (8,51) .335 (9,91) .390 (10,29) .405 (10,92) .430 (1,27 mm ) .050" header ftr series s = single row d = double row s option d option surface smt mount c o s t s a v i n g s o l u t i o n s
|
